Blinkers don't seem to work right or stay on after trying to give a remote command

Problem:

When using the remote to start a top operation, the blinkers blink erratically and sometimes just stay on solid. The module does not seem to react correctly to the remote sequence and doesn't acknowledge the each key press with one blink of the turn signals.

Cause:

This can be just as simple as a burned out light bulb in one of the blinkers. Try the regular blinkers left and right and check that the blinking speed is normal. If one side blinks faster, then it is most likely a faulty light bulb on that side.

Solution:

Find the faulty light bulb and replace it. That fixes the issue.