Mods4cars Support Product Support Knowledgebase Connection and mechanical issues
After originally working fine, the top suddenly won't work after the module was removed and re-installed
Suggested knowledgebase articles:

After originally working fine, the top suddenly won't work after the module was removed and re-installed

Problem:

The module used to work fine and had to be removed, for example for a visit at the dealer and was later re-installed. Now the top only opens or only closes or other unexpected behavior is observed.

This can also happen right out of the box when installing the module for the first time.

 

A pin in the 16-way MOLEX connector got pushed back in the housing and is not making proper contact!

 

Solution:

Remove the pin as shown in the next two pictures, carefully bend the two small metal latches outward with a small screw driver or knife and fully insert the pin into the hole until it securely latches into place.

Was this article helpful? Yes | No

Article Details

Article ID:
69
Category:
Connection and mechanical issues
Date added:
2015-03-31 00:39:10
Views:
936
Rating (Votes):
(16)

Related articles