Mods4cars Support Product Support
Knowledgebase
Suggested knowledgebase articles:

Knowledgebase

Connection and mechanical issues

General

RKLBPE1 - RemoteKEY for Porsche Boxster 987 and Cayman 987

RTAXPE1 - RemoteTOP for Porsche 996 Convertible

STAFPE1 - SmartTOP for Porsche 996 Convertible

STAXPE2 - SmartTOP for Porsche 996 Convertible

STHFBW1 - SmartTOP for BMW 6 Series F12

STHFII1 - SmartTOP for Infiniti G37 Convertible

STHFMA1 - SmartTOP for Mazda MX5

STHFMZ2 - SmartTOP for Mercedes SLK R172

STHFNN1 - SmartTOP for Nissan 370z

STHFRT1 - SmartTOP for Renault Megane II Convertible

STHFVO1 - SmartTOP for Volvo C70 Convertible

STLBMZ1 - SmartTOP for MB SLK R171 / CLK A209 / SL R230

STLBPE1 / STLXPE1 - SmartTOP for Porsche 997 Convertible

STLFAI1 - SmartTOP for Audi A3, A4 Convertible, TT and Golf6 Convertible

STLFAI2 - SmartTOP for Audi A5 Convertible

STLFBW1 / STE93, STLFBW3, STLFBW4, STLFBW5 - SmartTOP for BMW 1, 3, 6, Z4, Mini

STLFBW6 - SmartTOP for BMW 3 Series E46

STLFBW7 - SmartTOP for BMW Z4 E85 and Mini R52

STLFMZ1 - SmartTOP for Mercedes SLK R170

STLFPT1 - SmartTOP for Peugeot 207cc

STLFPT2 - SmartTOP for Peugeot 307cc

STLFPT3 - SmartTOP for Peugeot 308cc

STLFVN1 - SmartTOP for Volkswagen EOS

TVHBMZ1 - SmartTV for Mercedes with HighSpeed CAN

TVLBMZ1 - SmartTV for Mercedes with LowSpeed CAN

TVLBBW1 - SmartTV for BMW Exx Chassis

STHBPE2 - SmartTOP for Porsche Boxster (981)

STHFJR1 - SmartTOP for Jaguar F-Type

STHFBW2 - SmartTOP for BMW 4 Series (F33)

STLFCT1 - SmartTOP for Corvette C7 "Stingray"

STHFAI1 - SmartTOP for Audi A3

  • Top articles
  • Latest articles

MANUAL installation of the USB driver under WINDOWS

Category: General

Under certain circumstances it may be necessary to install the USB driver for the module manually. In cases where auto detection fails or Microsoft Update is temporarily offline and the driver can not...

26,436
(253)

USB configuration for ALL MODULES with USB port

Category: General

All new modules now come with a USB port for quick firmware updates and PC based configuration. Please go to www.mods4cars.com/usb for more information and software downloads. There you can find our ...

15,042
(57)

Issues with installation or manual. Anything not working or not clear

Category: STLFCT1 - SmartTOP for Corvette C7 "Stingray"

Here is a very good article on Stingray Forums with a nice, detailed installation account written by a forum member. Definitely worth a read:   http://www.stingrayforums.com/forum/stingray-how-s-guide...

14,416
(23)

Faulty USB driver included in OS X Mavericks, Yosemite and El Capitan prevents proper operation of m4cconnect. *SOLUTION*

Category: General

Problem: When installing m4cconnect on Mac OS beginning with Mavericks, proper operation is not possible. m4cconnect v1.11 will not connect to the module, m4cconnect 1.21 and later will report a warni...

13,895
(116)

Where to obtain the TYCO connector caps and crimp pins in case of damage

Category: Connection and mechanical issues

In case any of the following parts was lost or damaged during installation or removal, they can be obtained from any local Mercedes or BMW dealership.   BMW/MB Parts Plastic cap smallMercedes Benz pa...

7,617
(30)

SETUP MENU does not show up, no AUDIO OFF message in cluster.

Category: STLBMZ1 - SmartTOP for MB SLK R171 / CLK A209 / SL R230

PROBLEM: Everything works, but how do I get the menu to appear on the cars dashboard, please?Looking at your manual, my display does not say audio off, just shows the clock with ignition half of, and ...

4,788
(3)

Laptop or PC only has USB type C ports. How can the module be connected?

Category: Connection and mechanical issues

In cases where the PC or Mac only comes with USB Type C ports, a C to A adapter is required. Amazon usually offers a variety of these adapters such as this one:  https://a.co/d/hGln38Q  

97
(0)

How to change factory WINDOWS UP/DOWN setting from the remote

Category: STHFAI1 - SmartTOP for Audi A3

PROBLEM: When using the SmartTOP module, the factory feature to press and hold to raise or lower the windows will get in the way and should ideally be turned off.   SOLUTION: Change the setting as fol...

484
(2)

Can the windows be lowered or raised from the module

Category: STHFMA1 - SmartTOP for Mazda MX5

Unfortunately due to the extremely limited and simple electronics in the Mazda this is not possible and will never be possible from the module. This applies to the STHFMA1 for Mazda MX-5 PRHT and STHF...

917
(6)

All Plug-and-Play modules: Connection Issues II. Damage to the module harness

Category: Connection and mechanical issues

Most common issue when installing plug and play wiring adapters are bent-over contact pins as shown in this photo:    

1,045
(3)

When trying to run m4cconnect under Windows, an error about a missing MSVCR100.dll is shown

Category: General

Problem: When trying to run m4cconnect under Windows, an error message is shown about a missing DLL and the app does not atart.   Cause: Windows does not come with all runtime libraries out of the box...

1,409
(26)

Demonstration video of the Mods4cars Blinker Setup Menu used on most SmartTOP modules

Category: General

This video is a demonstration of the Blinker Setup Menu used on most SmartTOP modules. The left arrow always shows the selected function, the right arrow shows the current programmed setting. On some ...

1,600
(11)